B&M Air Raid Sirens: Difference between revisions

From airraidsirens.net, the Internet's premiere site for siren information and discussion
Jump to navigation Jump to search
VisualWikitext
No edit summary
(If B&M stopped making large sirens in 1963 then ACA obviously couldn't be a competitor lol)
 
(10 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{Infobox siren
{{Infobox siren
|image =[[File:B&M.jpg|300px]]
|image =B&M 20-AR-10 Sierra.jpg
|company= B & M Siren Manufacturing Co
|company= Bayless & Miles Siren Manufacturing Co.
|produced= 1930s(?) - 1960s(?)
|produced= 1920s - ~1963
|type=[[Electromechanical]]  
|type=[[Electromechanical]] [[Omnidirectional]]  
}}
|caption=A B&M 20-AR-10, located in Sierra Madre, CA. It is one of few remaining active B&M outdoor warning sirens.}}'''Bayless & Miles Siren Manufacturing Co,''' often shortened to '''B&M,''' is a manufacturer of vehicular and civil defense sirens, and is one of the oldest siren manufacturers, having been in business since 1913. While they currently only offer the [[B&M Siro-Drift|Siro-Drift]] vehicular sirens, B&M used to produce large outdoor warning sirens during World War II and the Cold War. With other siren manufacturers having a much larger presence, B&M eventually discontinued their line of outdoor warning sirens due to declining sales and a heavier focus on vehicular sirens. B&M is still around today restoring and building vehicular sirens.


''B&M'' is a manufacturer of vehicular and civil defense sirens, and is one of the longest running siren manufacturers, having been in business since 1913. While they currently only offer vehicular sirens, B&M used to produce large outdoor warning sirens during World War II and the Cold War. With other siren manufacturers having a much larger presence, B&M eventually discontinued their line of outdoor warning sirens due to declining sales. They are still around today restoring and building vehicular sirens.
== History ==
[[File:B&M rotor.png|left|thumb|160x160px|B&M's unique curved rotor design demonstrated on a full 14 port rotor.]]
[[File:B&M Logo.png|thumb|259x259px|B&M's logo used on many of their large sirens.]]The Bayless & Miles Siren Manufacturing Company was formed in the early 1910s by James Bayless and Lester Miles, who sought to create friction sirens for motorcycles. Bayless would leave the company in 1921 after losing interest in sirens, signing over the rights to the company to Miles.
[[File:B&M.jpg|left|thumb|207x207px|An advert for some of B&M's large air raid sirens.]]B&M began making outdoor warning sirens sometime during the 1920s, as stationary sirens were mentioned as early as 1927. As World War II raged on and the Cold War loomed over the horizon, the demand for dual tone civil defense sirens was rising, to distinguish them from single tone fire sirens. B&M entered the market with a multitude of single and dual toned sirens, ranging from small single rotor sirens meant for tiny communities to large dual rotor sirens meant for big cities. These sirens had highly efficient rotor designs with curved rotor vanes, combined with screaming high tones that made for painfully loud sirens that could be heard for miles.  


B&M began making outdoor warning sirens sometime during the early 1930s, as patents for the 15-H-4 were filed in August of 1930. Advertisements also suggest they started building them in the 1930s. As World War II raged on and the Cold War loomed over the horizon, the demand for dual tone civil defense sirens was rising, to distinguish them from single tone fire sirens. B&M entered the market with a multitude of single and dual toned sirens, ranging from small single rotor sirens meant for tiny communities to large dual rotor sirens meant for big cities. These sirens had extremely efficient rotor designs, combining that with screaming high tones made for painfully loud sirens that can be heard for miles.
B&M continued making these civil defense sirens up until around 1963. It's likely that they couldn't keep up with competition from other manufacturers such as [[:Category:Federal Signal Corporation|Federal Sign & Signal]], and B&M mainly specialized in vehicular sirens. B&M ultimately opted to switch back to purely making vehicular sirens, which they continue to do to this day, along with restoring any siren one presents to them. Unfortunately, much information about B&M's larger sirens have been lost. B&M themselves lack any records detailing the production and history of these sirens, which they speculate is due to the records from that time period being confiscated by the United States government since the sirens were built for Civil Defense use. As a result, there is a lot of information that is now lost to time, as it is unlikely the government still has these records.


Today, there are few B&M civil defense sirens left, as all but a handful have been taken out of service due to age, replacement, or towns simply no longer having a need for them. However, B&M's vehicular sirens can still be found in widespread use today.


== General Alarms ==
== Products ==


=== 6GA ===
=== General Alarm Sirens ===
The 6GA is B&M's smallest electric siren, being only 1/2 horsepower with a 6 inch, 6 port rotor, shared with the 6FA friction siren. Despite being so tiny, the 6GA has proven to be extremely loud for its size, with a privately owned unit reaching 130 dBA from up close. The 6GA was also referred to as the 6-AR-1, as it was also sold under the air raid siren lineup as a siren for compact suburban areas. 6GAs were sold with bell shaped shrouds to cover the siren, though earlier models were non-shrouded horizontal units with large intake horns.  
[[File:B&M Model 10 with housing.png|thumb|188x188px|A privately owned B&M Model 10 next to its weatherproof housing.|left]][[File:B&M 6GA.png|thumb|179x179px|A privately owned 6GA, shown without the bell housing.]]
==== 6GA ====
The 6GA is B&M's smallest electric siren, being only 1/2 horsepower with a 6-inch, 6-port rotor, shared with the 6FA friction siren. Despite being so tiny and only running on 120V, the 6GA has proven to be extremely loud for its size, with a privately owned unit reaching 130 dBA from up close. The 6GA was also referred to as the 6-AR-1, as it was also sold under the air raid siren lineup as a siren for compact suburban areas. 6GAs were sold with bell shaped shrouds to cover the siren.  


=== 8GA ===
==== 8GA ====
The 8GA is B&M's mid-size general alarm, equipped with an 8 inch, 8 port rotor, shared in design with the S8-B vehicular siren, apart from some minor changes to accommodate a standard shaft. They were sold with bell shaped shrouds to cover the siren. Few are known to exist in the wild, as the larger 10GA was a more popular choice.
The 8GA is B&M's mid-size general alarm, equipped with an 8-inch, 8-port stator shared with B&M's vehicular sirens. The rotor is slightly different, having no need for the large clutch hub. They were sold with bell shaped shrouds to cover the siren. Few are known to exist in the wild, as the larger 10GA was a more popular choice.


=== 10GA ===
==== 10GA ====
The 10GA is B&M's largest general alarm siren, utilizing a 2.5 horsepower motor to turn a 10 inch, 8 port rotor. Especially popular in Texas and surrounding states, the 10GA is one of B&M's more common outdoor sirens. It was also referred to as the Model 10 and the Model 10-AR-2 under B&M's air raid siren lineup, being the second smallest siren of the pack. They were sold with either bell shaped shrouds, partially exposed shrouding (similar to a Sentry [[Sentry Siren Incorporated|5V]]), or weatherproof screened shrouds, similar to a [[Scream Master]] or [[Federal Signal]] [[Model 5]]. The 10GA also ended up being the base for B&M's S10-B siren, a vehicular siren built solely for collectors. There is a good few active 10GA sirens, as well as a handful in private ownership.
The 10GA is B&M's largest general alarm siren, utilizing a 2.5 horsepower motor to turn a 10-inch, 8-port rotor. Especially popular in Texas and surrounding states, the 10GA is one of B&M's more common outdoor sirens. It was also referred to as the Model 10 and the Model 10-AR-2 under B&M's air raid siren lineup, being the second smallest siren of the pack. They were sold with bell shaped shrouds, or with fully enclosed shrouds as the Model 10.


== Air Raid Sirens ==
=== Air Raid Sirens ===
[[File:B&M 20-AR-7.jpg|left|thumb|160x160px|A privately owned B&M 20-AR-7 with optional intake horns.]]


=== 15-AR-5 ===
==== 20-AR-7 ====
The B&M 15-AR-5 is the smallest dual end AR series siren, presumably with two 15 inch rotors being driven by a 5 horsepower motor. None are known to exist. It was best suited for smaller cities, according to B&M.
The 20-AR-7 is the mid-size dual end AR series siren, with two 20-inch stators and 18 <sup>1/8</sup> inch rotors powered by a 7.5 horsepower motor. A good few units still remain today, albeit inactive or under private ownership. They came in 16/20-port standard, and no remaining examples have a different port ratio. The 16/20-port units are unique by using 8/10-port rotors inside of 16/20-port stators, with the rotor ports the same size as the stator ports. It is believed B&M did this to get more equal sound distribution out of the intakes and ports, leading to more uniform coverage. This would create two octave tones, making for a very odd sounding siren. The 20-AR-7 was best suited for large cities, according to B&M. B&M also offered a single rotor version of this siren, called the '''20-AR'''. Four have been documented, and at least three exist today.
[[File:MDHCA.org B&M 20-AR-10.jpg|left|thumb|160x160px|A static display of the MDHCA museums' 14/16-port 20-AR-10 in Goffs, CA.]]
[[File:B&M 20-AR-10.png|thumb|160x160px|A 12/16-port 20-AR-10 siren on display, one of the unique units with half-ported 6/8 rotors.]]


=== 20-AR-7 ===
==== 20-AR-10(•2T) ====
The 20-AR-7 is the mid-size dual end AR series siren, with two 20 inch rotors powered by a 7.5 horsepower motor. A good few units still remain today, albeit inactive or under private ownership. They came in 16/20 port standard, and no remaining examples have a different port ratio. The 16/20 port units are unique by using 8/10 port rotors inside of 16/20 port stators, with the rotor having half the port count of the stators. It is believed B&M did this to get more equal sound distribution out of the intakes and ports, leading to more uniform coverage. This would create two octave tones, making for a very odd sounding siren. The 20-AR-7 was best suited for large cities, according to B&M. B&M also offered a single rotor version of this siren, called the '''20-AR'''. Four have been documented, and at least three exist today.
The 20-AR-10, or 20AR10•2T, is B&M's largest AR series siren, with two 20-inch stators and 18 <sup>1/8</sup> inch rotors, longer than the rotors on a 20-AR-7 with the same diameter. The 20-AR-10 is driven by a dual shafted 10 horsepower AC motor. It was sold in 12/16-port with 6/8-port rotors, full 14/16-port, and possibly more that may currently be unknown. 6 examples are known to remain today, one being incomplete with only one 14-port rotor and the motor at B&M's facility, a display unit at an Orange County, CA fire station, Sierra Madre, CA's siren, Carlisle, PA's siren, Perris, CA's siren and a display unit at the Mojave Desert Historical & Cultural Association (MDHCA.org) in Goffs, CA. The 20-AR-10 was best suited for widespread metropolitan areas, according to B&M.


=== 20-AR-10 ===
=== H Series ===
The 20-AR-10 is B&M's largest AR series siren, with two 20 inch rotors, longer than what you see on a 20-AR-7, driven by a 10 horsepower motor. It was sold in 12/16 port with 6/8 port rotors, full 14/16 port, and possibly more. 5 examples remain today, one being only one 14 port rotor and the motor at B&M's facility, a display unit at an Orange County, CA fire station 46, Sierra Madre, CA's active unit, an inactive unit in Perris, CA, and another inactive unit in Carlisle, PA. The 20-AR-10 was best suited for widespread metropolitan areas, according to B&M.      
[[File:B&M 15-H-2.png|left|thumb|160x160px|A B&M 15-H-2 in an advertisement.]]


== H Series ==
==== 15-H-2 ====
The 15-H-2 is the smallest siren in the H Series lineup, being just 3 horsepower with two 15-inch stators, and likely close to 13 inch rotors. The rotors are 6-port, and the stators are 12-port, making for a heavier undertone. Most likely because of its poor price/performance ratio compared to other models, the 15-H-2 was not a popular choice, being only $50 less than the 15-H-4 at the time. None are known to exist today.
[[File:B&M 15-H-4.jpg|thumb|160x160px|An inactive B&M 15-H-4, wide intake variant, in Kingman, AZ. Photo by Adam Pollak.]]
[[File:15h4s.png|thumb|159x159px|An inactive B&M 15-H-4, slim intake variant, in Slaughter, LA. Photo by Jackson Purinton]]


=== 15-H-2 ===
==== 15-H-4 ====
The 15-H-2 is the smallest siren in the H Series lineup, being just 3 horsepower with two 15 inch rotors. The rotors are 6 port, and the stators are 12 port, making for an interesting octave tone despite being a single tone siren. Most likely because of it's price, the 15-H-2 was not a popular choice, being only $50 less than the 15-H-4 at the time. None are known to exist.  
The 15-H-4 is the second siren in the H Series lineup, it has two 15-inch stators, and rotors likely close to 13 inches. It is driven by a 5 horsepower motor. The 15-H-4 is similar to the 15-H-2, just having longer rotors and a more powerful motor. Some 15-H-4s also have slightly wider intakes than the 15-H-2, and these units generally have a larger U.S. motor. Like the 15-H-2, the 15-H-4 is a 6/6-port siren with 12-port stators. All 15-H-4s known to exist have stator flanges for stator shrouds to be mounted, and one 15-H-4 in Kingman, AZ has the stator shrouds and horn extensions on the intakes. The 15-H-4 is the most common siren of the H Series, as it was much cheaper than the largest H Series siren, but only slightly more than the 15-H-2. It is also believed that the 15-H-4 was the same as the 15-AR-5, with little to no changes.


=== 15-H-4 ===
==== 18-H-7 ====
The 15-H-4 is the second siren in the H Series lineup, it has two 15 inch rotors driven by a 5 horsepower motor. The 15-H-4 is similar to the 15-H-2, just having longer rotors and a larger motor. Like the 15-H-2, the 15-H-4 is a 6/6 port siren with 12 port stators. All 15-H-4s known to exist have stator flanges for stator shrouds to be mounted, and one 15-H-4 in Kingman, AZ has horn extensions on the intakes. The 15-H-4 is the most common siren of the H Series, as it was the most reasonably priced, being much cheaper than the largest H Series siren. Three 15-H-4s are known to exist. B&M also made a vertical single rotor version of this siren, which was located in Bodega, CA. It has since been removed.  
The 18-H-7 was the largest siren in the H series lineup, presumably with two 18-inch stators and a 10 horsepower motor. Not much is known about the 18-H-7, as it likely never sold well due to being double the price of a 15-H-4. None have ever been documented, and none are known to exist today.
[[File:B&M Steam Siren.jpg|left|thumb|160x160px|A B&M steam driven siren, which is on display in a museum.]]


=== 18-H-7 ===
==== Steam Driven Siren ====
The 18-H-7 was the largest siren in the H series lineup, boasting two 18 inch rotors and a 10 horsepower motor. Not much is known about the 18-H-7, as it never sold well, likely due to being double the price of a 15-H-4. None have ever been documented, and none are known to exist today.   
B&M produced at least one steam powered siren for the Atchison, Topeka & Santa Fe (ATSF) Railway in San Bernardino, California for use at their freight railyards. This 7-port siren has a turbine in the rear which drives the rotor to roughly 4,500 RPM when supplied with steam from the railroad shop it was mounted on. It was expected to be audible as far as 6 miles away in Highland, CA, but whether or not that was met is unknown. One of these sirens was once located on top of a building in the railroad's San Bernardino yard and was used for air raid and general alarms, before being taken out of service and donated to a museum.
 
[[Category:Sirens]]
B&M continued making these civil defense sirens up until somewhere in the 1960's, as the last documented installation was in 1965. It's likely that they couldn't keep up with competition from other manufacturers such as Federal or B&N, as B&M had poor advertising and high prices for their sirens. B&M ultimately opted to switch back to purely making vehicular sirens, which they continue to do to this day, along with restoring any siren you present to them. Today, there are few B&M civil defense sirens left, as all but one have been taken out of service due to age, replacement, or towns simply no longer having a need for them. However, their vehicular sirens and general alarm sirens can be found in widespread use. Only a single active B&M air raid siren remains, a 20-AR-10 located in Sierra Madre, CA.  
[[Category:Single Toned Sirens]]
 
[[Category:Dual Toned Sirens]]
 
[[Category:Electromechanical Sirens]]
 
[[Category:Omnidirectional Sirens]]
[[Category:Siren Manufacturers]]
[[Category:Pneumatic Sirens]]
__INDEX__

Latest revision as of 19:53, 25 October 2024

B&M Air Raid Sirens

A B&M 20-AR-10, located in Sierra Madre, CA. It is one of few remaining active B&M outdoor warning sirens.

Company Bayless & Miles Siren Manufacturing Co.
Produced 1920s - ~1963
Type Electromechanical Omnidirectional

Bayless & Miles Siren Manufacturing Co, often shortened to B&M, is a manufacturer of vehicular and civil defense sirens, and is one of the oldest siren manufacturers, having been in business since 1913. While they currently only offer the Siro-Drift vehicular sirens, B&M used to produce large outdoor warning sirens during World War II and the Cold War. With other siren manufacturers having a much larger presence, B&M eventually discontinued their line of outdoor warning sirens due to declining sales and a heavier focus on vehicular sirens. B&M is still around today restoring and building vehicular sirens.

History

B&M's unique curved rotor design demonstrated on a full 14 port rotor.
B&M's logo used on many of their large sirens.

The Bayless & Miles Siren Manufacturing Company was formed in the early 1910s by James Bayless and Lester Miles, who sought to create friction sirens for motorcycles. Bayless would leave the company in 1921 after losing interest in sirens, signing over the rights to the company to Miles.

An advert for some of B&M's large air raid sirens.

B&M began making outdoor warning sirens sometime during the 1920s, as stationary sirens were mentioned as early as 1927. As World War II raged on and the Cold War loomed over the horizon, the demand for dual tone civil defense sirens was rising, to distinguish them from single tone fire sirens. B&M entered the market with a multitude of single and dual toned sirens, ranging from small single rotor sirens meant for tiny communities to large dual rotor sirens meant for big cities. These sirens had highly efficient rotor designs with curved rotor vanes, combined with screaming high tones that made for painfully loud sirens that could be heard for miles.

B&M continued making these civil defense sirens up until around 1963. It's likely that they couldn't keep up with competition from other manufacturers such as Federal Sign & Signal, and B&M mainly specialized in vehicular sirens. B&M ultimately opted to switch back to purely making vehicular sirens, which they continue to do to this day, along with restoring any siren one presents to them. Unfortunately, much information about B&M's larger sirens have been lost. B&M themselves lack any records detailing the production and history of these sirens, which they speculate is due to the records from that time period being confiscated by the United States government since the sirens were built for Civil Defense use. As a result, there is a lot of information that is now lost to time, as it is unlikely the government still has these records.

Today, there are few B&M civil defense sirens left, as all but a handful have been taken out of service due to age, replacement, or towns simply no longer having a need for them. However, B&M's vehicular sirens can still be found in widespread use today.

Products

General Alarm Sirens

A privately owned B&M Model 10 next to its weatherproof housing.
A privately owned 6GA, shown without the bell housing.

6GA

The 6GA is B&M's smallest electric siren, being only 1/2 horsepower with a 6-inch, 6-port rotor, shared with the 6FA friction siren. Despite being so tiny and only running on 120V, the 6GA has proven to be extremely loud for its size, with a privately owned unit reaching 130 dBA from up close. The 6GA was also referred to as the 6-AR-1, as it was also sold under the air raid siren lineup as a siren for compact suburban areas. 6GAs were sold with bell shaped shrouds to cover the siren.

8GA

The 8GA is B&M's mid-size general alarm, equipped with an 8-inch, 8-port stator shared with B&M's vehicular sirens. The rotor is slightly different, having no need for the large clutch hub. They were sold with bell shaped shrouds to cover the siren. Few are known to exist in the wild, as the larger 10GA was a more popular choice.

10GA

The 10GA is B&M's largest general alarm siren, utilizing a 2.5 horsepower motor to turn a 10-inch, 8-port rotor. Especially popular in Texas and surrounding states, the 10GA is one of B&M's more common outdoor sirens. It was also referred to as the Model 10 and the Model 10-AR-2 under B&M's air raid siren lineup, being the second smallest siren of the pack. They were sold with bell shaped shrouds, or with fully enclosed shrouds as the Model 10.

Air Raid Sirens

A privately owned B&M 20-AR-7 with optional intake horns.

20-AR-7

The 20-AR-7 is the mid-size dual end AR series siren, with two 20-inch stators and 18 1/8 inch rotors powered by a 7.5 horsepower motor. A good few units still remain today, albeit inactive or under private ownership. They came in 16/20-port standard, and no remaining examples have a different port ratio. The 16/20-port units are unique by using 8/10-port rotors inside of 16/20-port stators, with the rotor ports the same size as the stator ports. It is believed B&M did this to get more equal sound distribution out of the intakes and ports, leading to more uniform coverage. This would create two octave tones, making for a very odd sounding siren. The 20-AR-7 was best suited for large cities, according to B&M. B&M also offered a single rotor version of this siren, called the 20-AR. Four have been documented, and at least three exist today.

A static display of the MDHCA museums' 14/16-port 20-AR-10 in Goffs, CA.
A 12/16-port 20-AR-10 siren on display, one of the unique units with half-ported 6/8 rotors.

20-AR-10(•2T)

The 20-AR-10, or 20AR10•2T, is B&M's largest AR series siren, with two 20-inch stators and 18 1/8 inch rotors, longer than the rotors on a 20-AR-7 with the same diameter. The 20-AR-10 is driven by a dual shafted 10 horsepower AC motor. It was sold in 12/16-port with 6/8-port rotors, full 14/16-port, and possibly more that may currently be unknown. 6 examples are known to remain today, one being incomplete with only one 14-port rotor and the motor at B&M's facility, a display unit at an Orange County, CA fire station, Sierra Madre, CA's siren, Carlisle, PA's siren, Perris, CA's siren and a display unit at the Mojave Desert Historical & Cultural Association (MDHCA.org) in Goffs, CA. The 20-AR-10 was best suited for widespread metropolitan areas, according to B&M.

H Series

A B&M 15-H-2 in an advertisement.

15-H-2

The 15-H-2 is the smallest siren in the H Series lineup, being just 3 horsepower with two 15-inch stators, and likely close to 13 inch rotors. The rotors are 6-port, and the stators are 12-port, making for a heavier undertone. Most likely because of its poor price/performance ratio compared to other models, the 15-H-2 was not a popular choice, being only $50 less than the 15-H-4 at the time. None are known to exist today.

An inactive B&M 15-H-4, wide intake variant, in Kingman, AZ. Photo by Adam Pollak.
An inactive B&M 15-H-4, slim intake variant, in Slaughter, LA. Photo by Jackson Purinton

15-H-4

The 15-H-4 is the second siren in the H Series lineup, it has two 15-inch stators, and rotors likely close to 13 inches. It is driven by a 5 horsepower motor. The 15-H-4 is similar to the 15-H-2, just having longer rotors and a more powerful motor. Some 15-H-4s also have slightly wider intakes than the 15-H-2, and these units generally have a larger U.S. motor. Like the 15-H-2, the 15-H-4 is a 6/6-port siren with 12-port stators. All 15-H-4s known to exist have stator flanges for stator shrouds to be mounted, and one 15-H-4 in Kingman, AZ has the stator shrouds and horn extensions on the intakes. The 15-H-4 is the most common siren of the H Series, as it was much cheaper than the largest H Series siren, but only slightly more than the 15-H-2. It is also believed that the 15-H-4 was the same as the 15-AR-5, with little to no changes.

18-H-7

The 18-H-7 was the largest siren in the H series lineup, presumably with two 18-inch stators and a 10 horsepower motor. Not much is known about the 18-H-7, as it likely never sold well due to being double the price of a 15-H-4. None have ever been documented, and none are known to exist today.

A B&M steam driven siren, which is on display in a museum.

Steam Driven Siren

B&M produced at least one steam powered siren for the Atchison, Topeka & Santa Fe (ATSF) Railway in San Bernardino, California for use at their freight railyards. This 7-port siren has a turbine in the rear which drives the rotor to roughly 4,500 RPM when supplied with steam from the railroad shop it was mounted on. It was expected to be audible as far as 6 miles away in Highland, CA, but whether or not that was met is unknown. One of these sirens was once located on top of a building in the railroad's San Bernardino yard and was used for air raid and general alarms, before being taken out of service and donated to a museum.

Retrieved from "https://wiki.airraidsirens.net/index.php?title=B%26M_Air_Raid_Sirens&oldid=12991"