Appendix 1 and Appendix 2: Difference between revisions

From airraidsirens.net, the Internet's premiere site for siren information and discussion
Jump to navigation Jump to search
No edit summary
(Blanked the page)
Tag: Blanking
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{Infobox siren
|image =
<gallery>
Piba anlage 1.jpg|Appendix 1
</gallery>
|company= Pintsch Bamag
|produced=1962-1964
|type=[[Pneumatic]]
|output=?
|hertz =?


}}{{Infobox siren
|image =
<gallery>
Piba anlage 2.jpg|Appendix 2
</gallery>
|company= Pintsch Bamag
|produced=1965-1968
|type=[[Pneumatic]]
|output=124
|hertz = 420 - 430
}}
The Appendix 1 and Appendix 2 are pneumatic sirens made by German manufacture Pintsch Bamag. The Appendix 1 is the first version which had a taller head and had its engine room bunker off to the side. Then later the Appendix 2 came out and had its engine bunker at the base of the tower. This siren works the same as all the other German pneumatic sirens. A bunker at the base of the sirens tower that has a diesel engine that powers an air compressor and generator. The air tank in this siren is mounted inside the center of the sirens tower ,unlike outside like the HLS F-71 or inside the bunker like the HLS-273. There are only two of these sirens active ,which are Appendix 2s. All the others have either have been removed ,replaced with a Hormann ECN ,sitting abandoned ,and some have had radio antennas mounted on them.
<gallery>
BDEE1D24-EEEC-4558-89E2-E6A873F35F8A.jpeg|Base of the Appendix 2 tower. The door leads to a ladder ,and down the ladder is the engine ,generator ,and accumulators. 
</gallery>
[[Category:Pintsch Bamag]][[Category:Omnidirectional Sirens]][[Category:Pnuematic Sirens]][[Category:Single Toned Sirens]][[Category:Sirens]]

Latest revision as of 05:17, 19 January 2022