Model 3: Difference between revisions
Jump to navigation
Jump to search
TheCamWheel (talk | contribs) mNo edit summary |
TheCamWheel (talk | contribs) mNo edit summary |
||
| Line 19: | Line 19: | ||
|sheet= | |sheet= | ||
}} | }} | ||
The C1 1/2 or most commonly known as the '''Model 3''', not to be confused with the C2 1/2 which had a 2 inch larger rotor, was a 3 horse power, mechanical, omni-directional siren produced by [[Federal Signal Corporation]] part of the Fedelcode lineup. It's essentially the smaller version of the [[Model 5]]. The rotor is 13 inches in diameter which came in 2 different port ratios: 12 and 8-port single tone only. No dual tone versions of this siren were available. The siren was housed in a very simple enclosure that resembles an air vent found on building roofs. The C1 1/2 was the least bought model, only marginally louder than the [[Model 2]], which made it not as successful, and was discontinued due to lack of demand as the [[Model 2]] outsold it. | The C1 1/2 or most commonly known as the '''Model 3''', not to be confused with the C2 1/2 (Model 5) which had a 2 inch larger rotor, was a 3 horse power, mechanical, omni-directional siren produced by [[Federal Signal Corporation]] part of the Fedelcode lineup. It's essentially the smaller version of the [[Model 5]]. The rotor is 13 inches in diameter which came in 2 different port ratios: 12 and 8-port single tone only. No dual tone versions of this siren were available. The siren was housed in a very simple enclosure that resembles an air vent found on building roofs. The C1 1/2 was the least bought model, only marginally louder than the [[Model 2]], which made it not as successful, and was discontinued due to lack of demand as the [[Model 2]] outsold it. | ||
[[Category:Federal Signal Corporation]][[Category:Electromechanical Sirens]][[Category:Omnidirectional Sirens]][[Category:Single Toned Sirens]][[Category:Sirens]] | [[Category:Federal Signal Corporation]][[Category:Electromechanical Sirens]][[Category:Omnidirectional Sirens]][[Category:Single Toned Sirens]][[Category:Sirens]] | ||
Revision as of 06:13, 25 July 2024
| C1 1/2 | |
[[File: | |
| Company | Federal Signal Corporation |
|---|---|
| Produced | 1929 - May 1967 |
| Type | Electromechanical |
| Sound output | 105 |
| Succeeded by | Model 2 |
The C1 1/2 or most commonly known as the Model 3, not to be confused with the C2 1/2 (Model 5) which had a 2 inch larger rotor, was a 3 horse power, mechanical, omni-directional siren produced by Federal Signal Corporation part of the Fedelcode lineup. It's essentially the smaller version of the Model 5. The rotor is 13 inches in diameter which came in 2 different port ratios: 12 and 8-port single tone only. No dual tone versions of this siren were available. The siren was housed in a very simple enclosure that resembles an air vent found on building roofs. The C1 1/2 was the least bought model, only marginally louder than the Model 2, which made it not as successful, and was discontinued due to lack of demand as the Model 2 outsold it.