Federal Signal XT22: Difference between revisions
TheCamWheel (talk | contribs) mNo edit summary |
TheCamWheel (talk | contribs) mNo edit summary Tag: Reverted |
||
| Line 10: | Line 10: | ||
}} | }} | ||
== General == | == General == | ||
The XT22 was an omnidirectional siren produced by [[Federal Signal Corporation]]. The design features a single motor in the middle with a twelve-port rotor/stator set on top and a 10-port set on bottom. Both rotors measured 15 inches in diameter and are identical to rotors used on the [[ | The XT22 was an omnidirectional siren produced by [[Federal Signal Corporation]]. The design features a single motor in the middle with a twelve-port rotor/stator set on top and a 10-port set on bottom. Both rotors measured 15 inches in diameter and are identical to rotors used on the [[C2 1/2]] and [[2001 series]]. The 3T22 model featured solenoids attached to the top and bottom intakes to produce a third signal. The 2T22 lacked the additional signal option. | ||
Both models were available in single and three phase versions. Three phase models used either a GE (early) or Marathon 10 horsepower motor. The only motor used on the single phase model was the Northwestern Electric 7 1/2 horsepower repulsion-induction motor. | Both models were available in single and three phase versions. Three phase models used either a GE (early) or Marathon 10 horsepower motor. The only motor used on the single phase model was the Northwestern Electric 7 1/2 horsepower repulsion-induction motor. | ||
Revision as of 22:40, 18 June 2024
| 2T22 and 3T22 | |
[[File:  | |
| Company | Federal Signal Corporation |
|---|---|
| Type | Electromechanical |
| Sound output | 113 |
| Documentation | Manual |
General
The XT22 was an omnidirectional siren produced by Federal Signal Corporation. The design features a single motor in the middle with a twelve-port rotor/stator set on top and a 10-port set on bottom. Both rotors measured 15 inches in diameter and are identical to rotors used on the C2 1/2 and 2001 series. The 3T22 model featured solenoids attached to the top and bottom intakes to produce a third signal. The 2T22 lacked the additional signal option.
Both models were available in single and three phase versions. Three phase models used either a GE (early) or Marathon 10 horsepower motor. The only motor used on the single phase model was the Northwestern Electric 7 1/2 horsepower repulsion-induction motor.
A fully assembled siren weighs close to 700 pounds, including the pole mount bracket.