Model 3: Difference between revisions
TheCamWheel (talk | contribs) mNo edit summary |
TheCamWheel (talk | contribs) No edit summary |
||
| Line 19: | Line 19: | ||
|sheet= | |sheet= | ||
}} | }} | ||
The C1 1/2 or most commonly known as the '''Model 3''', not to be confused with the C2 1/2 ([[Model 5]]) which had a 15 inch rotor, was a 3 horse power, mechanical, omni-directional siren produced by [[Federal Signal Corporation]] part of the Fedelcode lineup. The '''Model 3''' is a step down | The C1 1/2 or most commonly known as the '''Model 3''', not to be confused with the C2 1/2 ([[Model 5]]) which had a 15 inch rotor, was a 3 horse power, mechanical, omni-directional siren produced by [[Federal Signal Corporation]] part of the Fedelcode lineup. The '''Model 3''' is a step down from the [[Model 5]], but people still manage to get confused with the two despite the Model 3 being pretty uncommon. The rotor is 13 inches in diameter which came in 2 different port ratios: 12 and 8-port single tone only. No dual tone versions of this siren were available. The siren was housed in a very simple enclosure that resembles an air vent found on building roofs. The C1 1/2 was the least sold model, only marginally louder than the [[Model 2]], which caused it to be not as successful, and was discontinued due to lack of demand as the [[Model 2]] outsold it. | ||
[[Category:Federal Signal Corporation]][[Category:Electromechanical Sirens]][[Category:Omnidirectional Sirens]][[Category:Single Toned Sirens]][[Category:Sirens]] | [[Category:Federal Signal Corporation]][[Category:Electromechanical Sirens]][[Category:Omnidirectional Sirens]][[Category:Single Toned Sirens]][[Category:Sirens]] | ||
Revision as of 09:00, 29 July 2024
| C1 1/2 | |
[[File: | |
| Company | Federal Signal Corporation |
|---|---|
| Produced | 1929 - May 1967 |
| Type | Electromechanical |
| Sound output | 105 |
| Succeeded by | Model 2 |
The C1 1/2 or most commonly known as the Model 3, not to be confused with the C2 1/2 (Model 5) which had a 15 inch rotor, was a 3 horse power, mechanical, omni-directional siren produced by Federal Signal Corporation part of the Fedelcode lineup. The Model 3 is a step down from the Model 5, but people still manage to get confused with the two despite the Model 3 being pretty uncommon. The rotor is 13 inches in diameter which came in 2 different port ratios: 12 and 8-port single tone only. No dual tone versions of this siren were available. The siren was housed in a very simple enclosure that resembles an air vent found on building roofs. The C1 1/2 was the least sold model, only marginally louder than the Model 2, which caused it to be not as successful, and was discontinued due to lack of demand as the Model 2 outsold it.