Thunderbolt: Difference between revisions
m (More typos, more troubles) |
(→Thunderbolt 1003: More clarification) |
||
Line 11: | Line 11: | ||
== Thunderbolt 1003 == | == Thunderbolt 1003 == | ||
The '''Thunderbolt 1003''' uses two solenoids that are attached to the | The '''Thunderbolt 1003''' uses two solenoids that are attached to the throat of the horn. Each solenoid has a gate that closes off one row of ports on the stator. They are used to create alternating steady, alternating wail, pulsed steady, and pulsed wail signals, which can be used as a fire warning. Otherwise, it is identical to the 1000T. | ||
== Other models == | == Other models == |
Revision as of 02:53, 13 December 2013
The Thunderbolt siren was a supercharged electromechanical siren produced by Federal Electric, which later became known as Federal Sign & Signal and Federal Signal. The Thunderbolt has seven chopper levels, or voltage settings, that allow the pitch to be adjusted on the chopper, the Thunderbolt can come in three port ratios, 5 Port, 4/5 Port, and 5/6 Port.
Thunderbolt 1000
The Thunderbolt 1000 is a single-tone siren. The 1000's chopper has 5 ports.
Thunderbolt 1000T
The Thunderbolt 1000T is a dual-toned siren. The 1000T can come in 4/5 or 5/6 port ratios, which correspond to minor 3rd and major 3rd intervals, respectively.
Thunderbolt 1003
The Thunderbolt 1003 uses two solenoids that are attached to the throat of the horn. Each solenoid has a gate that closes off one row of ports on the stator. They are used to create alternating steady, alternating wail, pulsed steady, and pulsed wail signals, which can be used as a fire warning. Otherwise, it is identical to the 1000T.
Other models
Thunderbolt 2000
A single-tone variant from the 1950s with a gas-powered blower.