Penetrator: Difference between revisions
| Line 6: | Line 6: | ||
This siren was nearly identical to its younger brother, but is instead powered by a 15 HP motor. Some models have been equipped with dampers in the tube to create coded signals. | This siren was nearly identical to its younger brother, but is instead powered by a 15 HP motor. Some models have been equipped with dampers in the tube to create coded signals. | ||
== | == Penetrator-20 == | ||
This type began as the problematic Performance+ Penatrator, made especially for Dane County, Wisconsin. The siren was intended to be 100% DC, but was never perfected, and thus the project was scrapped. The Penatrator-20 uses the 9 port rotor from the Screamer S5, and was attached | This type began as the problematic Performance+ Penatrator, made especially for Dane County, Wisconsin. The siren was intended to be 100% DC, but was never perfected, and thus the project was scrapped. The Penatrator-20 uses the 9 port rotor from the Screamer S5, and was attached | ||
[[File:P-15.JPG|thumb|An inactive P-10/15 in Mechanicsburg, Pennsylvania.]] | [[File:P-15.JPG|thumb|An inactive P-10/15 in Mechanicsburg, Pennsylvania.]] | ||
[[Category:Sirens]][[Category:Rotating Sirens]][[Category:Electromechanical Sirens]][[Category:Alerting Communicators of America]][[Category:Single Toned Sirens]][[Category:Dual Toned Sirens]] | [[Category:Sirens]][[Category:Rotating Sirens]][[Category:Electromechanical Sirens]][[Category:Alerting Communicators of America]][[Category:Single Toned Sirens]][[Category:Dual Toned Sirens]] | ||
Revision as of 11:01, 5 July 2018
The Penetrator series is a series of rotating sirens by Alerting Communicators of America that mainly consisted of 4 models: The P-10, P-15, PN-20, and the P-50.
Penetrator-10
This model was the first to appear, slightly after the Allertor 125. It uses the same 10 HP motor to drive either a 9/12 port or the rare 8 port stators. This model can sometimes be differed from its look-alike twin, the P-15, by its intake cone. However it depends, because the dual tone P-15 shares the same intake cone as the P-10 does. The P-10 does not use the cylindric intake found on single tone P-15s. That is limited to the P-15 only.
Penetrator-15
This siren was nearly identical to its younger brother, but is instead powered by a 15 HP motor. Some models have been equipped with dampers in the tube to create coded signals.
Penetrator-20
This type began as the problematic Performance+ Penatrator, made especially for Dane County, Wisconsin. The siren was intended to be 100% DC, but was never perfected, and thus the project was scrapped. The Penatrator-20 uses the 9 port rotor from the Screamer S5, and was attached
