Penetrator: Difference between revisions
(Added P-50) |
(Added P-50) |
||
| Line 1: | Line 1: | ||
The Penetrator series is a series of rotating sirens by Alerting Communicators of America that mainly consisted of 4 models: The P-10, P-15, PN-20, and the P-50. | The Penetrator series is a series of rotating sirens by Alerting Communicators of America that mainly consisted of 4 models: The P-10, P-15, PN-20, and the P-50. | ||
{{Infobox siren | |||
|image= [[File:P-50 Official.jpg|200px]] | |||
|produced ? | |||
|company= [[Alerting Communicators of America]], [[American Signal Corporation]] | |||
|output= | |||
|neigh=10, 15, and 50 | |||
|succeeded= [[T-128]] [[T-135 AC/DC]] | |||
|type= [[Electromechanical]] | |||
}} | |||
== Penetrator-10 == | == Penetrator-10 == | ||
This model was the first to appear, slightly after the Allertor 125. It uses the same 10 HP motor to drive the 9/12 port stator. This model can sometimes be differed from its look-alike twin, the P-15, by its intake cone. However it depends, because the dual tone P-15 shares the same intake cone as the P-10 does. The P-10 does not use the cylindric intake found on single tone P-15s. That is limited to the P-15 only. | This model was the first to appear, slightly after the Allertor 125. It uses the same 10 HP motor to drive the 9/12 port stator. This model can sometimes be differed from its look-alike twin, the P-15, by its intake cone. However it depends, because the dual tone P-15 shares the same intake cone as the P-10 does. The P-10 does not use the cylindric intake found on single tone P-15s. That is limited to the P-15 only. | ||
Revision as of 17:20, 28 November 2018
The Penetrator series is a series of rotating sirens by Alerting Communicators of America that mainly consisted of 4 models: The P-10, P-15, PN-20, and the P-50.
| Penetrator | |
[[File: |200px]]
| |
| Company | Alerting Communicators of America, American Signal Corporation |
|---|---|
| Type | Electromechanical |
| Succeeded by | T-128 T-135 AC/DC |
Penetrator-10
This model was the first to appear, slightly after the Allertor 125. It uses the same 10 HP motor to drive the 9/12 port stator. This model can sometimes be differed from its look-alike twin, the P-15, by its intake cone. However it depends, because the dual tone P-15 shares the same intake cone as the P-10 does. The P-10 does not use the cylindric intake found on single tone P-15s. That is limited to the P-15 only.
Penetrator-15
This siren was nearly identical to its older brother, but is instead powered by a 15 HP motor. Some models have been equipped with dampers in the tube to create coded signals.
Penetrator-20
This type began as the problematic Performance+ Penatrator, made especially for Dane County, Wisconsin. The siren was intended to be 100% DC, but was never perfected, and thus the project was scrapped. The Penatrator-20 uses the 9 port rotor from the Screamer S5, and was attached
Penetrator-50
The P-50, later known as the RM-135 and T-135-AC, was the biggest model of the Penetrator series, packing a massive 50HP motor pushing a sound output of 135dBc @ 100 feet. It's vastly different from it's smaller brothers sharing it's rotor and stator with the Cyclone. It holds the title of the world's loudest dual-tone siren as well as the loudest electric powered siren.