Penetrator: Difference between revisions

From airraidsirens.net, the Internet's premiere site for siren information and discussion
Jump to navigation Jump to search
(Added P-50)
m (Clarified the Howler came before the P-10)
Line 12: Line 12:


== Penetrator-10 ==
== Penetrator-10 ==
This model was the first to appear, slightly after the Allertor 125. It uses the same 10 HP motor to drive the 9/12 port stator. This model can sometimes be differed from its look-alike twin, the P-15, by its intake cone. However it depends, because the dual tone P-15 shares the same intake cone as the P-10 does. The P-10 does not use the cylindric intake found on single tone P-15s. That is limited to the P-15 only.
This model was the first to appear, slightly after the Allertor 125 and the short-lived ACA Howler. It uses the same 10 HP motor to drive the 9/12 port stator. This model can sometimes be differed from its look-alike twin, the P-15, by its intake cone. However it depends, because the dual tone P-15 shares the same intake cone as the P-10 does. The P-10 does not use the cylindric intake found on single tone P-15s. That is limited to the P-15 only.


== Penetrator-15 ==
== Penetrator-15 ==

Revision as of 14:16, 27 February 2019

The Penetrator series is a series of rotating sirens by Alerting Communicators of America that mainly consisted of 4 models: The P-10, P-15, PN-20, and the P-50.


Penetrator
[[File:|200px]]
Company Alerting Communicators of America, American Signal Corporation
Type Electromechanical
Succeeded by T-128 T-135 AC/DC

Penetrator-10

This model was the first to appear, slightly after the Allertor 125 and the short-lived ACA Howler. It uses the same 10 HP motor to drive the 9/12 port stator. This model can sometimes be differed from its look-alike twin, the P-15, by its intake cone. However it depends, because the dual tone P-15 shares the same intake cone as the P-10 does. The P-10 does not use the cylindric intake found on single tone P-15s. That is limited to the P-15 only.

Penetrator-15

This siren was nearly identical to its older brother, but is instead powered by a 15 HP motor. Some models have been equipped with dampers in the tube to create coded signals.

Penetrator-20

This type began as the problematic Performance+ Penatrator, made especially for Dane County, Wisconsin. The siren was intended to be 100% DC, but was never perfected, and thus the project was scrapped. The Penatrator-20 uses the 9 port rotor from the Screamer S5, and was attached

An inactive P-15 in Mechanicsburg, Pennsylvania.

Penetrator-50

The P-50, later known as the RM-135 and T-135-AC, was the biggest model of the Penetrator series, packing a massive 50HP motor pushing a sound output of 135dBc @ 100 feet. It's vastly different from it's smaller brothers sharing it's rotor and stator with the Cyclone. It holds the title of the world's loudest dual-tone siren as well as the loudest electric powered siren.