XT22: Difference between revisions
Jump to navigation
Jump to search
m (Mrboojay moved page 2T22 to 2T22 and 3T22: Moving the page to include both sirens.) |
m (Removed a hyperlink to another page that is not needed.) |
||
| Line 6: | Line 6: | ||
}} | }} | ||
The 2T22 was an omnidirectional siren produced by [[Federal Signal Corporation]]. The design features a single motor in the middle with a twelve-port rotor/stator set on top and a 10-port set on bottom. Both rotors measured 14 inches in diameter, and are identical to rotors used on the model 3 and 2001. A similar model featuring coding dampers was sold as the | The 2T22 was an omnidirectional siren produced by [[Federal Signal Corporation]]. The design features a single motor in the middle with a twelve-port rotor/stator set on top and a 10-port set on bottom. Both rotors measured 14 inches in diameter, and are identical to rotors used on the model 3 and 2001. A similar model featuring coding dampers was sold as the 3T22. | ||
Both models were available in single and three phase versions. Three phase models used either a GE (early) or Marathon 10 horsepower motor. The only motor used on the single phase model was the Northwestern Electric 7 1/2 horsepower repulsion-induction motor. | Both models were available in single and three phase versions. Three phase models used either a GE (early) or Marathon 10 horsepower motor. The only motor used on the single phase model was the Northwestern Electric 7 1/2 horsepower repulsion-induction motor. | ||
Revision as of 02:39, 26 February 2017
| XT22 | |
[[File: | |
| Company | Federal Signal Corporation |
|---|---|
| Sound output | 113 |
The 2T22 was an omnidirectional siren produced by Federal Signal Corporation. The design features a single motor in the middle with a twelve-port rotor/stator set on top and a 10-port set on bottom. Both rotors measured 14 inches in diameter, and are identical to rotors used on the model 3 and 2001. A similar model featuring coding dampers was sold as the 3T22.
Both models were available in single and three phase versions. Three phase models used either a GE (early) or Marathon 10 horsepower motor. The only motor used on the single phase model was the Northwestern Electric 7 1/2 horsepower repulsion-induction motor.
A fully assembled siren weighs close to 700 pounds, including the pole mount bracket.