Allertor 125
| Allertor 125 | |
[[File: | |
| Company | Alerting Communicators of America |
|---|---|
| Produced | 1968-1981 |
| Type | Electromechanical |
| Sound output | 125 |
| Succeeded by | P-10 |
General
The Allertor 125 is a rotating siren produced by Alerting Communicators of America. The Allertor is one of it's kind as it intakes air through the bottom horn, and blows it out the top horn. Additionally, it had a chain driven rotator, which was proved to be extremely faulty. Even a simple rust or un-lubricated part of a chain rotator could snap out of place. Allertors were also extremely heavy, and had an unsupported pole mount, which made it very prone to falling over.
Rarities
The siren came in 8/12, 9/12, and 10/12. The 8/12 and 10/12 versions are rare. The siren also came in a 8 port model, which is extremely rare.
History
The Allertor first became as a very "strange" idea brought up around 1945, ACA and many other civil defense companies were struggling to find reliable ways of allerting the public after WWII, as Russia had many threats to bomb and/or raid the United States. Around 1960, the first prototype of an Allertor was produced. Early models of the Allertor were made of metal. This slowly grew their popularity. In 1968, the Allertor was changed to the Allertor 125 when it's material was changed to fiberglass. Sadly, this change made the price very much increase, but none the less the siren was extremely popular. The Allertor lasted until 1980, where the P-10 would soon overcome the problems that the Allertor had, and would replace it.