Federal Signal XT22

From airraidsirens.net, the Internet's premiere site for siren information and discussion
Revision as of 01:00, 25 December 2013 by Holler (talk | contribs)
Jump to navigation Jump to search
Federal Signal XT22
[[File:{{{image}}}|200px]]
Company Federal Signal Corporation
Sound output 113

The 2T22 was an omnidirectional siren produced by Federal Signal Corporation. The design features a single motor in the middle with a twelve-port rotor/stator set on top and a 10-port set on bottom. Both rotors measured 14 inches in diameter, and are identical to rotors used on the model 3 and 2001. A similar model featuring coding dampers was sold as the 3T22

Both models were available in single and three phase versions. Three phase models used either a GE (early) or Marathon 10 horsepower motor. The only motor used on the single phase model was the Northwestern Electric 7 1/2 horsepower repulsion-induction motor.

A fully assembled siren weighs close to 700 pounds, including the pole mount bracket.

Retrieved from "https://wiki.airraidsirens.net/index.php?title=Federal_Signal_XT22&oldid=825"