Appendix 1 and Appendix 2: Difference between revisions

From airraidsirens.net, the Internet's premiere site for siren information and discussion
Jump to navigation Jump to search
No edit summary
No edit summary
Line 2: Line 2:
|image =
|image =
<gallery>
<gallery>
Hqdefault.jpg|Appendix 2 in Kassel Germany
Piba anlage 1.jpg|Appendix 1
</gallery>
</gallery>
|company= Pintsch Bamag
|company= Pintsch Bamag
|produced=1962 - 1965
|produced=1962 - 1964
|type=[[Pneumatic]]
|output=?
|hertz =?
 
}}{{Infobox siren
|image =
<gallery>
Piba anlage 2.jpg|Appendix 2
</gallery>
|company= Pintsch Bamag
|produced=1965 - 1968
|type=[[Pneumatic]]  
|type=[[Pneumatic]]  
|output=124
|output=124

Revision as of 03:57, 4 May 2019

Appendix 1 and Appendix 2
Company Pintsch Bamag
Produced 1962 - 1964
Type Pneumatic
Sound output ? dBc at 100 feet
Frequency ? Hz
Appendix 1 and Appendix 2
Company Pintsch Bamag
Produced 1965 - 1968
Type Pneumatic
Sound output 124 dBc at 100 feet
Frequency 420 - 430 Hz

The Appendix 1 and Appendix 2 are pneumatic sirens made by German manufacture Pintsch Bamag. The Appendix 1 is the first version which had a taller head and had its engine room bunker off to the side. Then later the Appendix 2 came out and had its engine bunker at the base of the tower. This siren works the same as all the other German pneumatic sirens. A bunker at the base of the sirens tower that has a diesel engine that powers an air compressor and generator. The air tank in this siren is mounted inside the center of the sirens tower ,unlike outside like the HLS F-71 or inside the bunker like the HLS-273. There are only two of these sirens active. All the others have either have been removed ,replaced with a Hormann ECN ,sitting abandoned ,and some have had radio antennas mounted on them.