Attachment 1 and Annex 2: Difference between revisions

From airraidsirens.net, the Internet's premiere site for siren information and discussion
Jump to navigation Jump to search
(Created page with "{{Infobox siren |image = <gallery> Hqdefault.jpg|Annex 2 in Kassel Germany </gallery> |company= Pintsch Bamag |produced=1962 - 1965 |type=Pneumatic |output=124 |hertz = 4...")
 
(Blanked the page)
Tag: Blanking
 
Line 1: Line 1:
{{Infobox siren
|image =
<gallery>
Hqdefault.jpg|Annex 2 in Kassel Germany
</gallery>
|company= Pintsch Bamag
|produced=1962 - 1965
|type=[[Pneumatic]]
|output=124
|hertz = 420 - 430
}}
The Attachment 1 and Annex 2 are pneumatic sirens made by German manufacture Pintsch Bamag. This siren works the same as all the other German pneumatic sirens. A bunker at the base of the sirens tower that has a diesel engine that powers an air compressor and generator. The air tank in this siren is mounted inside the center of the sirens tower ,unlike outside like the HLS F-71 or inside the bunker like the HLS-273. There are only two of these sirens active. All the others have either have been removed ,replaced with a Hormann ECN ,sitting abandoned ,and some have had radio antennas mounted on them.
<gallery>
BDEE1D24-EEEC-4558-89E2-E6A873F35F8A.jpeg|Base of tower. The door leads to a ladder ,and down the ladder is the engine ,generator ,and accumulators. 
</gallery>


[[Category:Pintsch Bamag]][[Category:Omnidirectional Sirens]][[Category:Pnuematic Sirens]][[Category:Single Toned Sirens]][[Category:Sirens]]

Latest revision as of 01:02, 4 May 2019