Model 2: Difference between revisions

From airraidsirens.net, the Internet's premiere site for siren information and discussion
Jump to navigation Jump to search
(Moved 2T to separate section as was suggested 3 years ago.)
(Added information on the differences in the various eras of Model 2s, and a picture of a long leg 2T.)
Line 27: Line 27:
}}
}}
The '''Model 2''' is an omnidirectional siren produced by [[Federal Signal Corporation]].  It holds the record for the longest production run of any siren. This siren has a rating of 102 decibels at 100 feet.  There was also a coded version produced in limited quantities. Although the Fedelcode name was used on many examples, most did not actually contain a coding mechanism.  
The '''Model 2''' is an omnidirectional siren produced by [[Federal Signal Corporation]].  It holds the record for the longest production run of any siren. This siren has a rating of 102 decibels at 100 feet.  There was also a coded version produced in limited quantities. Although the Fedelcode name was used on many examples, most did not actually contain a coding mechanism.  
==Variations==
There were different variations of housings and other differences as 2 production carried on. In regards to housings, the first Model 2s had two louvers on top, and one on the bottom. This was common practice until the 1950s, when a new housing design, the more notable one louver on top and two on the bottom (as seen on the right) was introduced. There are versions with evenly spaced louvers. These housings belong to the Fedelcode versions of the 2. The first 2s were referred to as the "Long Legs". They were called this because the mounting legs that bolted to the motor were rather tall, at roughly 9 or 10 inches tall. It is also worth noting the Long Legs lacked the intake cone and stator ring for stabilizing the housing that newer sirens feature. The long leg sirens were predominately single tone, yet some dual tones have shown up, such as the example in New Orleans, LA that is pictured. The long leg sirens also used 4 brushes as opposed to 2. The 4 brush setup and long legs were replaced with a short leg, two brush setup around 1953, with the version still currently produced today. Although these differences are quite noticeable, the basic formula for the Model 2 has remained constant since the first ones were built around 1917.


==Model 2T==
==Model 2T==
During the Cold War Era, [[Federal Signal Corporation]] released a version of the '''Model 2''' that was duel tone. The 2T had a rating of 100 decibels at 100 feet.
During the Cold War Era, [[Federal Signal Corporation]] released a version of the '''Model 2''' that was dual tone. The 2T had a rating of 100 decibels at 100 feet. The 2T started production in the late 1950s, but was discontinued around 1970. However, the 2T was an order option as late as the early 1980s.
 
[[File:New orleans 2t.png|thumbnail|left|A long leg, shroudless 2T]]


[[Category:Federal Signal Corporation]][[Category:Electromechanical Sirens]][[Category:Omnidirectional Sirens]][[Category:Single Toned Sirens]][[Category:Sirens]][[Category:Dual Toned Sirens]]
[[Category:Federal Signal Corporation]][[Category:Electromechanical Sirens]][[Category:Omnidirectional Sirens]][[Category:Single Toned Sirens]][[Category:Sirens]][[Category:Dual Toned Sirens]]

Revision as of 19:15, 23 October 2017

Model 2
Model 2 in Lewisberry, Pennsylvania.
Company Federal Signal Corporation
Produced 1917-present
Type Electromechanical
Sound output 102 (Single Tone) 100 (Dual Tone)[1] dBc at 100 feet
Frequency 533 (Single Tone) 533/427 (Dual Tone) [1] Hz
Horsepower 2
Documentation Manual
Product sheet

The Model 2 is an omnidirectional siren produced by Federal Signal Corporation. It holds the record for the longest production run of any siren. This siren has a rating of 102 decibels at 100 feet. There was also a coded version produced in limited quantities. Although the Fedelcode name was used on many examples, most did not actually contain a coding mechanism.

Variations

There were different variations of housings and other differences as 2 production carried on. In regards to housings, the first Model 2s had two louvers on top, and one on the bottom. This was common practice until the 1950s, when a new housing design, the more notable one louver on top and two on the bottom (as seen on the right) was introduced. There are versions with evenly spaced louvers. These housings belong to the Fedelcode versions of the 2. The first 2s were referred to as the "Long Legs". They were called this because the mounting legs that bolted to the motor were rather tall, at roughly 9 or 10 inches tall. It is also worth noting the Long Legs lacked the intake cone and stator ring for stabilizing the housing that newer sirens feature. The long leg sirens were predominately single tone, yet some dual tones have shown up, such as the example in New Orleans, LA that is pictured. The long leg sirens also used 4 brushes as opposed to 2. The 4 brush setup and long legs were replaced with a short leg, two brush setup around 1953, with the version still currently produced today. Although these differences are quite noticeable, the basic formula for the Model 2 has remained constant since the first ones were built around 1917.

Model 2T

During the Cold War Era, Federal Signal Corporation released a version of the Model 2 that was dual tone. The 2T had a rating of 100 decibels at 100 feet. The 2T started production in the late 1950s, but was discontinued around 1970. However, the 2T was an order option as late as the early 1980s.

A long leg, shroudless 2T
  1. 1.0 1.1 (PDF) Service Manual, Outdoor Warning Sirens, Models 2, 5, SD10, STH10, STL10. Federal Signal Corporation. Retrieved October 23, 2017.