Model 3: Difference between revisions

From airraidsirens.net, the Internet's premiere site for siren information and discussion
Jump to navigation Jump to search
No edit summary
No edit summary
Line 6: Line 6:
|produced = ? - Mid 1950's
|produced = ? - Mid 1950's
|type =[[Electromechanical]]
|type =[[Electromechanical]]
|output =105
|output =?
|hertz =
|hertz =
|neigh =3
|neigh =3
Line 18: Line 18:
|sheet=  
|sheet=  
}}
}}
The '''Model 3''' was a 3 horsepower, omnidirectional siren produced by [[Federal Signal Corporation]]. This siren has a rating of 105 decibels at 100 feet. It was a very basic small 12 or 8 port siren. It's easy to identify by its really small housing.
The '''Model 3''' was a 3 horse power, mechanical, omni-directional siren produced by [[Federal Signal Corporation]]. It's essentially the smaller version of the [[Model 5]]. The rotor is 12 inches in diameter coming in 2 different port ratios: 12 and 8 port single tone. The siren was housed in a very simple enclosure that resembles an air vent found on building roofs.


[[Category:Federal Signal Corporation]][[Category:Electromechanical Sirens]][[Category:Omnidirectional Sirens]][[Category:Single Toned Sirens]][[Category:Sirens]][[Category:Dual Toned Sirens]]
[[Category:Federal Signal Corporation]][[Category:Electromechanical Sirens]][[Category:Omnidirectional Sirens]][[Category:Single Toned Sirens]][[Category:Sirens]][[Category:Dual Toned Sirens]]

Revision as of 06:28, 12 December 2018

Model 3
Company Federal Signal Corporation
Produced ? - Mid 1950's
Type Electromechanical
Sound output ? dBc at 100 feet
Horsepower 3

The Model 3 was a 3 horse power, mechanical, omni-directional siren produced by Federal Signal Corporation. It's essentially the smaller version of the Model 5. The rotor is 12 inches in diameter coming in 2 different port ratios: 12 and 8 port single tone. The siren was housed in a very simple enclosure that resembles an air vent found on building roofs.