Modulator II Siren Series: Difference between revisions

From airraidsirens.net, the Internet's premiere site for siren information and discussion
Jump to navigation Jump to search
No edit summary
(Rewrote)
Line 6: Line 6:
|preceded  = [[Modulator]]
|preceded  = [[Modulator]]
}}
}}
The Modulator II is an electronic siren produced by [[Federal Signal Corporation]]. It is the second generation of the Modulator series. Each active cell contains four 100W drivers, with the bottom-most cell being a dummy to direct sound from the lowest active cell outward.
The Modulator II is an electronic siren produced by [[Federal Signal Corporation]] and is an evolution of the original [[Modulator]], being shorter, narrower and thus more compact. It is modular, containing a variable number of cells. Each active cell contains up to four 100W compression drivers and directs sound downward to the top of the cell below it, where it is redirected outward. The bottom-most cell is a dummy to direct sound from the lowest active cell.
It is shorter and narrower than the original [[Modulator]], making it more compact.


The MOD6032 and MOD6048 models are replaced the MOD 8032B model which is a smaller more compact model.
The MOD6032 and MOD6048 models are replaced the MOD 8032B model which is a smaller more compact model.
[[Category:Federal Signal Corporation]][[Category:Electronic Sirens]][[Category:Omnidirectional Sirens]][[Category:Dual Toned Sirens]][[Category:Single Toned Sirens]][[Category:Sirens]]
[[Category:Federal Signal Corporation]][[Category:Electronic Sirens]][[Category:Omnidirectional Sirens]][[Category:Dual Toned Sirens]][[Category:Single Toned Sirens]][[Category:Sirens]]

Revision as of 21:52, 14 December 2013

Modulator II Siren Series
Company Federal Signal Corporation
Produced 2013-Present
Type Electronic
Preceded by Modulator

The Modulator II is an electronic siren produced by Federal Signal Corporation and is an evolution of the original Modulator, being shorter, narrower and thus more compact. It is modular, containing a variable number of cells. Each active cell contains up to four 100W compression drivers and directs sound downward to the top of the cell below it, where it is redirected outward. The bottom-most cell is a dummy to direct sound from the lowest active cell.

The MOD6032 and MOD6048 models are replaced the MOD 8032B model which is a smaller more compact model.