Elektror HZ 1: Difference between revisions

From airraidsirens.net, the Internet's premiere site for siren information and discussion
Jump to navigation Jump to search
(Moved page over from the CDS Wiki.)
 
(Added image)
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
{{Infobox siren|produced=1950s-1990s|company=Elektror Karl W. Müller|output=108 dB @ 1 m|type=[[Directional]] [[Hand Powered]]|title=Elektror HZ 1}}The '''Hand Pull Siren''', or '''HP 1''' (German: '''''Handzugsirene, HZ 1''''') is a small, hand powered siren intended as an alternative to a standard electric fire siren when power is unavailable. Produced by Elektror from sometime in the 1950s to the 1990s, the HZ 1 proved to be quite popular and is still sold today by various rebranders such as [[Rosenbauer International AG|Rosenbauer]] and Survival Solutions.
{{Infobox siren|produced=1950s-1990s|company=Elektror Karl W. Müller|output=108 dB @ 1 m|type=[[Directional]] [[Hand Powered]]|title=Elektror HZ 1|image=01_1977_0095.jpg|caption=The Handzugsirene HZ 1. This is an original Elektror unit.}}The '''Hand Pull Siren''', or '''HP 1''' (German: '''''Handzugsirene, HZ 1''''') is a small, hand powered siren intended as an alternative to a standard electric fire siren when power is unavailable. Produced by Elektror from sometime in the 1950s to the 1990s, the HZ 1 proved to be quite popular and is still sold today by various rebranders such as [[Rosenbauer International AG|Rosenbauer]] and Survival Solutions.


== History and Design ==
== History and Design ==
[[File:HZ 1 rebrand.jpg|left|thumb|160x160px|A typical rebranded HZ 1 unit.]]
The HZ 1 was introduced sometime in the 1950s by Elektror Karl W. Müller, who intended for the siren to be used in situations where power would be unavailable. The siren consists of a small aluminum 9-port rotor and stator, which is driven by a small pulley located at the bottom of the siren. A small metal hanger is on top of the stator, allowing for the siren to be mounted on walls. The material for this hanger often varies between rebrands, and in some instances, it is not included at all. A finger guard is included in front of the stator, as the siren can cause injury if it is misused. A small strap attached to the left and right side of the siren is also included, which is used for hanging the siren on the user's neck.
The HZ 1 was introduced sometime in the 1950s by Elektror Karl W. Müller, who intended for the siren to be used in situations where power would be unavailable. The siren consists of a small aluminum 9-port rotor and stator, which is driven by a small pulley located at the bottom of the siren. A small metal hanger is on top of the stator, allowing for the siren to be mounted on walls. The material for this hanger often varies between rebrands, and in some instances, it is not included at all. A finger guard is included in front of the stator, as the siren can cause injury if it is misused. A small strap attached to the left and right side of the siren is also included, which is used for hanging the siren on the user's neck.



Latest revision as of 23:28, 16 October 2024

Elektror HZ 1

The Handzugsirene HZ 1. This is an original Elektror unit.

Company Elektror Karl W. Müller
Produced 1950s-1990s
Type Directional Hand Powered
Sound output 108 dB @ 1 m

The Hand Pull Siren, or HP 1 (German: Handzugsirene, HZ 1) is a small, hand powered siren intended as an alternative to a standard electric fire siren when power is unavailable. Produced by Elektror from sometime in the 1950s to the 1990s, the HZ 1 proved to be quite popular and is still sold today by various rebranders such as Rosenbauer and Survival Solutions.

History and Design

A typical rebranded HZ 1 unit.

The HZ 1 was introduced sometime in the 1950s by Elektror Karl W. Müller, who intended for the siren to be used in situations where power would be unavailable. The siren consists of a small aluminum 9-port rotor and stator, which is driven by a small pulley located at the bottom of the siren. A small metal hanger is on top of the stator, allowing for the siren to be mounted on walls. The material for this hanger often varies between rebrands, and in some instances, it is not included at all. A finger guard is included in front of the stator, as the siren can cause injury if it is misused. A small strap attached to the left and right side of the siren is also included, which is used for hanging the siren on the user's neck.

On original Elektror units, the 4th opening between the 3rd and 4th finger guard is separated. However, for rebranded units, a large disc is in the place of the separation, typically with a sticker on it, which reads "Hz1". The siren's rotor can get up to around 4260 rpm. The siren is rated 108 dB at 1 m. After its introduction, the HZ 1 quickly became popular with places such as schools and public buildings who used the siren as a fire alarm, as well as various fire departments around Germany. The HZ 1 was discontinued in the 1990s, like most of Elektror's other siren offerings. However, it continued to be resold by various other companies that Elektror had leased the siren to. Today, the HZ 1 is fairly common and can be found in various places in Germany where short-range notification is required.