SiraTone

SiraTone
[[File:|200px]]
Company	Federal Signal Corporation
Produced	1980-1990
Type	Electronic Siren Controller
Succeeded by	MC

The SiraTone was the first electronic siren controller to be produced by Federal Signal Corporation for the EOWS Series, Modulator, and DSA sirens. SiraTone was an analog based dual tone controller that was designed to mimic the characteristics of Thunderbolt 1003. It was first debuted with the prototype EOWS*1212. These units produced 1200W of power to the speaker array and pulled 5 Amps of current. These units ran on 24VDC from 2 deep-cycle 12V batteries and were charged on automatic 120VAC or 240VAC battery chargers.

Features

Signals

SiraTone came with 7 signals, 6 standard and 1 optional AUX signal. The 6 standard tones were: Steady, Alternating Steady, Pulsed Steady, Wail, Alternating Wail, and Pulsed Wail. The AUX signal was an optional tone module that could be chosen during purchase, or purchased after the fact. The AUX tone module could be ordered with one of many tones: Yelp, Yeow, Slow Whoop, Temporal Slow Whoop, Bell, Gradual Horn, and Westminster Chimes (16 step). Later into production, Westminster Chimes (8 Step) was added to the options. These tone modules are identical to ones used in SelecTone, and can be ordered today in the form of the UTM or Universal Tone Module.

Local and Remote Live PA

SiraTone came standard with a local Live PA function. The controller shipped with a microphone that connected to the 6.3mm audio jack on the control module. The controller will automatically stop all operations whenever Live PA is activated and will begin broadcasting immediately. Remote PA is an optional radio broadcasting system that allows messages to be broadcasted through the speaker array from a base station.

Radio Control

SiraTone like many other Federal Signal products was available with radio activation methods. It utilized the SiraTrol radio system. It's possible that it was paired with the SC radio found on Modulator, DSA, and late EOWS*612 arrays.

Home/Remote Control Positioning (EOWS*408, 612, and 812 only)

This feature allows you to set 4 zoning positions for the rotational speaker array to face. Radio or land-line activation can position the array in zone to broadcast and area announcement in one direction. The standard automatic incrementing function will move the speaker array to the next zone after a transmission is completed.

Quiet Test

Quiet Test performs diagnostics on the operational status of the unit. Signal A and B, amplifiers, speakers, batteries, battery chargers, and rotator(if present) will be monitored. The status is displayed on the LEDs found on the Quiet Test board and/or other systems interfaced to the Quiet Test board.

RemoteScan

This is 2-way communication system that monitors the unit's operation and can report back to the base station when an action is performed or the base station polls the system for operational status.

Enclosure

The SiraTone was housed in a NEMA 4 cabinet, while the batteries were housed in a NEMA 3R cabinet. Both enclosures were powder coated steel. The later revision controller could be found with a NEMA 3R or NEMA 4 battery enclosure.

Variants

SiraTone C/B

SiraTone C/B was the 1200W variant of the SiraTone. This model was paired with EOWS*115, EOWS*1212, EOWS*612, and EOWS*812.

SiraTone revision controller

This model is the revised model of the original C/B. Changes were made to the controller layout and upgrades made to the power supply/charger unit. This controller was paired with EOWS*1212, EOWS*612, Modulator, and DSA.

SiraTone C/B4

SiraTone C/B4 was the 800W variant that was used to power the EOWS*408 array.

SiraTone C/M12

SiraTone C/M12 is the variant used for EOWS*M12. Specifics are unknown.