Thunderbeam

From airraidsirens.net, the Internet's premiere site for siren information and discussion
Revision as of 16:07, 7 December 2024 by Airinpringles (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Federal Signal RSH-10 "Thunderbeam"

A Model RSH-10A, located in Saxon, SC. Photo by Cam B. (Coldfire1010).

Company Federal Signal Corporation
Produced 1983-1995
Type Hybrid Rotational/Omnidirectional Electromechanical
Sound output 122-124 dB @ 100 ft
Horsepower 10 hp
Voltage 208-240/480 V
Preceded by Federal Signal 500
Succeeded by Federal Signal 2001
Documentation Manual

The Thunderbeam (Model RSH-10) is a unique rotational/omnidirectional hybrid siren that was produced by Federal Signal for over a decade, replacing the earlier Model 500-SH. The Thunderbeam was a popular siren, and its design allowed it to be much louder than its omnidirectional cousins. Model RSH-10 stands for "Rotating Single-tone High, 10 Horsepower".

History and Design

The Model RSH-10, advertised as the "Thunderbeam", was designed and created by Federal's then-chief designer, Earl Gosswiller in 1982. The siren was patented the same year, with the patent being published in 1985. The Thunderbeam would be Gosswiller's last patent, as he would retire from Federal in 1982. The siren was made in an attempt to amplify the sound of an omnidirectional siren without the need for an entire rotator assembly or horns.

A Model RSH-10B with the yellow top cover removed, showing the Model STH-10 rotor and stator. The rotating disc is also easily visible.

The Model RSH-10 makes use of a very unique design. Rather than having the rotor and stator inside of a horn that rotates, the Model RSH-10 instead has a stationary rotor and stator with a separate rotating deflector. The Model RSH-10 makes use of Federal's Model STH-10 rotor and stator, but instead of using horns to project the sound, the sound is instead directed downwards, and this concentrated beam of sound is then deflected by a rotating disc deflector, which is driven at 2 rpm by a 1592:1 gear reduction drive on the bottom of the disc directly attached to the rotor using a long shaft. This greatly amplifies and projects the sound, allowing it to reach 124 dB at 100 ft, far more than the 115 dB of a standard Model STH-10. Federal Signal originally claimed the siren to reach 128 dB but later reduced it to 124 dB.

The shaft that connects the rotor to the gearbox at the bottom of the siren.

Because the disc is directly driven by the rotor, the disc rotates and coasts with the rotor like an ACA Penetrator siren. The gearbox underneath the disc requires regular maintenance and lubrication. An unmaintained gearbox has the risk of stripping the gears during operation, causing the disc to spin incredibly fast which may lead to further damage to the siren. The disc is enclosed inside a very large metal mesh cage, which protects it from the elements. The rotor and stator are housed inside of a cover which is shaped in a way to direct the sound downwards, while also preventing rain and debris from damaging the rotor and stator. The siren's bare 10 hp electric motor is located on top of this cover, and was available in 1 and 3 ph, the Model RSH-10B and Model RSH-10A respectively.

Federal experimented with a Model RSL-10 during the siren's early development, using the rotor and stator from the 7-port Model STL-10. These used flattened horns that directed the sound down towards the disc, and the same concept was used with prototypical Model RSH-10 as well. Federal decided to drop the Model RSL-10 concept for unknown reasons, and they dropped the idea of using flattened horns in favor of a deflector to save costs, despite the reduced performance from doing so. No Model RSL-10 units are known to exist today.

The Model RSH-10 was a versatile multipurpose siren and was able to be used as a civil defense siren, a fire siren, or a severe weather siren. It was fairly popular, as it didn't cost much more than a Model STH-10 while offering superior performance. The Model RSH-10 would be discontinued around 1995, as this was the last time the Thunderbeam would be advertised or featured in any Federal publication. Today, the Model ECLIPSE8 takes its role as Federal Signal's main electromechanical omnidirectional siren. Many examples of Model RSH-10 sirens can still be found in service today across the United States, due to their popularity and ease of maintenance.

Gallery