EOWS: Difference between revisions

From airraidsirens.net, the Internet's premiere site for siren information and discussion
Jump to navigation Jump to search
m (Added 115 diagram)
(added dates and further information on 812 and 408.)
Line 23: Line 23:


===Further Expansion===
===Further Expansion===
After Federal Signal created this new product, they worked out some kinks with the SiraTone controller and expanded upon their electronic line with the introduction of the models '''408''', '''812''', and '''M*12'''. The 408 and 812 were rotating beam sirens made for better sound concentration and projection, while the M*12 was simply a mobile vehicular siren aimed for public events and such. Despite these new additions, the 1212 was still available as the only ''omni-directional'' model they offered. However, they changed the name from 1212 to '''115'''. The reasoning behind the name change is unknown, however many believe that it was simply named after it's actual output rating of 115dBc @ 100'.  
After Federal Signal created this new product, they worked out some kinks with the SiraTone controller and expanded upon their electronic line with the introduction of the models '''408''', '''812''', and '''M*12'''. The 408 and 812 were rotating beam sirens made for better sound concentration and projection, while the M*12 was simply a mobile vehicular siren aimed for public events and such. Despite these new additions, the 1212 was still available as the only ''omni-directional'' model they offered. However, they changed the name from 1212 to '''115'''. The reasoning behind the name change is unknown. In early stages, the EOWS*812 and 408 were made in a more "compact" manner with the projection horns recessing into the rear frame. This was very short lived and ditched by 1982.  


A few years passed and Federal Signal introduced 2 new EOWS products, the '''1212''' and '''612'''. Model 1212 was simply the 115 with the 408 and 812's spun aluminum projectors replacing the original rectangular fiberglass ones on the 115, for the sake of being uniform with the rest of the product line and performance. Model 612 was a combination of the 408 and 812. It managed to pull off performance similar to the 812 while staying relatively compact like the 408. It also used less materials than the 812. With the introduction of said models, came the discontinuation of the 408, and 812 sometime in 1984. However the 115 stayed around a little longer. '''Discontinuation of the M*12 is unknown.'''
A few years passed and Federal Signal introduced 2 new EOWS products, the '''1212''' and '''612'''. Model 1212 was simply the 115 with the 408 and 812's spun aluminum projectors replacing the original rectangular fiberglass ones on the 115, for the sake of being uniform with the rest of the product line and performance. Model 612 was a combination of the 408 and 812. It managed to pull off performance similar to the 812 while staying relatively compact like the 408. It also used less materials than the 812. With the introduction of said models, came the discontinuation of the 408, and 812 sometime in 1984. However the 115 stayed around a little longer. '''Discontinuation of the M*12 is unknown.'''

Revision as of 17:21, 7 January 2019

EOWS series
[[File:|200px]]
Company Federal Signal Corporation
Produced 1980-2001, 612 available on special order up to 2007
Type Electronic
Sound output 113-124
Succeeded by Modulator & DSA
Documentation
Product sheet

The EOWS series (Electronic Outdoor Warning Siren) was a line of electronic sirens produced by Federal Signal Corporation.

Early Production

The EOWS series came to light in 1980 when Federal Signal won a bid for an electronic siren system to be installed at the now defunct Zimmer nuclear plant. Federal Signal however did not have an electronic siren line, so this led to a new development they called SiraTone. Federal Signal produced around 30 prototype model EOWS*1212 sirens for the plant system. You may notice that these sirens look identical to the 115, but they are in fact 1212s as stated by the identification tags attached to them. The original system of prototype 1212s were later absorbed into surrounding communities after the Zimmer nuclear plant fell through. A few can be found today still in service, however most are on newer controllers. These early models were very simple arrays. Sourcing parts from Atlas Sound and University Sound(an Altec Lansing company), Federal created a very simple, yet effective electronic siren. The speaker projectors were rectangular re-entrant horns made out of fiberglass, sourced from University Sound. The drivers used were 100 Watt compression drivers sourced from Atlas Sound. The frame/enclosure was made custom by Federal Signal themselves.

Further Expansion

After Federal Signal created this new product, they worked out some kinks with the SiraTone controller and expanded upon their electronic line with the introduction of the models 408, 812, and M*12. The 408 and 812 were rotating beam sirens made for better sound concentration and projection, while the M*12 was simply a mobile vehicular siren aimed for public events and such. Despite these new additions, the 1212 was still available as the only omni-directional model they offered. However, they changed the name from 1212 to 115. The reasoning behind the name change is unknown. In early stages, the EOWS*812 and 408 were made in a more "compact" manner with the projection horns recessing into the rear frame. This was very short lived and ditched by 1982.

A few years passed and Federal Signal introduced 2 new EOWS products, the 1212 and 612. Model 1212 was simply the 115 with the 408 and 812's spun aluminum projectors replacing the original rectangular fiberglass ones on the 115, for the sake of being uniform with the rest of the product line and performance. Model 612 was a combination of the 408 and 812. It managed to pull off performance similar to the 812 while staying relatively compact like the 408. It also used less materials than the 812. With the introduction of said models, came the discontinuation of the 408, and 812 sometime in 1984. However the 115 stayed around a little longer. Discontinuation of the M*12 is unknown.

Late Production and Discontinuation

Smaller 20" variant of the speaker model used on the EOWS*408, 612, 812, and 1212.

Federal Signal continued production of model 1212, 115 and 612 for a few years, then things started to change in the early '90s. Federal Signal created a new omni-directional siren named the Modulator, leading to the demise of the EOWS*1212 and 115. However, Federal Signal kept the 612 in production, likely because it was their only rotating electronic siren at the time, it was efficient and powerful, and people still wanted to purchase them. They kept it up to date as well, modernizing it with their latest MC controller at the time. The EOWS*612 stuck around for many years into the future. However, Federal Signal removed it from their public websites in 2001 and only offered it as a special order model from 2001 up into 2007, with sales ending completely in 2007. Federal Signal unfortunately had to discontinue production on the EOWS*612 in 2007 as for they could no longer get speakers for them. Altec Lansing almost went bankrupt, cutting their losses, they killed off their University Sound branch, leaving Federal with no source for speakers.

Modern Use

All EOWS units are fairly simplistic electronic sirens, and are easy to update with modern hardware. Many units still in service are on the latest UltraVoice controller from Federal Signal. Many are on older Federal controllers, like the MC and MCP. Some units are even on third party controllers like ones by American Signal Corporation as well as Whelen Engineering. The units were originally manufactured with simple common components, meaning they were easy to repair if needed.

While the 612 was still in production, it received upgrades from Federal Signal with their newer MC controller, then the MCP controller, and later their UV controller. Federal Signal still supports EOWS*612 too. The UltraVoice controller openly states it's compatibility with the 612 in its documentation, earlier documentation stated it's compatibility with the 1212 as well. However, UV isn't limited to just the 612 and 1212. Any model EOWS siren is fully compatible with the UV. A few EOWS*408 units in Massachusetts were fitted with UltraVoice controllers in the early 2000s. Unfortunately these units were replaced by Modulator 5020s in the mid-2000s.

Models

There were a total of 6 mainstream models in the series:

Model Image Output Drivers Notes
EOWS*115 113 dBc 12 (1 per horn)
The earliest model in the series. Uncommon.
EOWS*408 119 dBc 8 (2 per horn)
The smallest rotating siren in the series. Rather uncommon.
EOWS*612 124 dBc 12 (2 per horn)
The most popular model. Many active examples can still be found today.
EOWS*812 124 dBc 12 (2 per horn for middle 4 horns, and 1 per horn for top and bottom 2 horns)
The largest siren in the series. Rather uncommon.
EOWS*1212 115 dBc 12 (1 per horn)
The successor to the 115.
EOWS*M12 123 dBc 4 (1 per horn)
Vehicular model. Decibel rating was measured at ten feet.[1]

EOWS*812

EOWS*408

EOWS*115

Example Videos

References